News:

New Users: Send [email protected] an email with your account name. I've turned off auto-approve to reduce the 100 new spam accounts a day. Thanks, -Jason

Main Menu

Flyback on board v's TS Diode

Started by se7ensport, September 11, 2012, 08:44:57 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

se7ensport

September 11, 2012, 08:44:57 PM
Need to double check this, I use 15.9 Ohms injectors:


  • Is the on board 30V flyback sufficient/correct for them?
  • Additionally with my old ecu I didn't have on board flyback and had a T.S. Diode from pin 23 within the wiring loom, please confirm that this should be removed due to the onboard flyback.

Thanks
Alex

GintsK

#1
September 13, 2012, 06:53:50 AM
Sufficient.
Use one 30V diode. At pin 23 directly connect  injector supply.

Gints
Print
Go Up Pages1
User actions