Hello all,
im currently right in the middle of a BMW E30 M50 turbo build, (non vanos, no EWS)
and i'v ran into a problem,
first of all the car span over,
the fuel pump primed,
the ICV was buzzing
but there was no fuel getting to the spark plugs,
and there was no spark,
so i'v changed the crankshaft sensor for a new one,
and now there is fuel getting to the plugs,
the injectors are ticking
but there is no spark,
The vems i'm using is a plug and play VEMS V3
which i bought new from Gunni here in the UK
1x VEMS ecu with 1x EGT input, 1x 36pin connector and pins, 1x 18pin connector and pins, 1x Bosch wideband sensor and wiring, 1x air temp sensor, 1 x EGT sensor
The ecu comes with a 300kpa map sensor good for 1.8bar boost.
The software for it is all up to date,
but in all honesty,
I dont have a clue how to work it (i'm just a driver)
i had it plugged into the laptop and had a look on the "log screen" and all that has came up is this.....
I'v shown this to gunni and he said this is not a problem as one gauge that can be configured, doesnt have description for it yet.
Can anyone help?
it's been 6 month in the making, and it's so close to just bursting into life
Cheers : )
