News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Round auto calibration

Started by fphil, June 08, 2012, 10:35:42 PM

Previous topic - Next topic

fphil

Hi,

We know that round should not need to be calibrated with respect to the LSU sensor it has to control since it takes into account a reference resistance attached to the sensor by the factory.

I have tested 2 new Bosch LSU with the same ROUND in free air.
Round gives 19.8 in one case, 20.3 in the other. I was expecting 29.8 - 30.0.
Any other experience?

Philippe

Sprocket

Why would you expect 29.8 - 30.0 ??

Oxygen in air is 20.95%

fphil

glups, yes 20.9, this is what I was thinking !
Anyway the Round may need be calibrated again despite the factory resistance, in peculiar when getting old