Author Topic: Wrong Starting - Cranking/Afterstart  (Read 5959 times)

Offline JRD McLAREN

  • Jr. Member
  • **
  • Posts: 10
  • BHP: 0
Wrong Starting - Cranking/Afterstart
« on: July 16, 2012, 06:09:15 pm »
Hello..
I have problem with starting my engine.. not matter if is cold or heat..

I not sure, it is only my suggestion maybe..
but if I have connected the tuning laptop, engine will start after few rews...
without anything connected - it can't start.

Have anybody some advice??
or same/similar problem .??
« Last Edit: July 16, 2012, 09:06:27 pm by mattias »

Offline mattias

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1075
  • BHP: 41
    • Sävar Turbo Site
Re: Wrong Starting - Cranking/Afterstart
« Reply #1 on: July 16, 2012, 09:05:44 pm »
The ECU thinks you're shorting the RX/TX wire on pin 2 and 3 of the serial port, and drops to bootloader mode instead of running the engine.

Make sure your serial port wiring is "nice looking".

(your post edited for clarity)

Offline JRD McLAREN

  • Jr. Member
  • **
  • Posts: 10
  • BHP: 0
Re: Wrong Starting - Cranking/Afterstart
« Reply #2 on: July 17, 2012, 09:07:12 am »
(thanks for edit...)

Thanks mattias...
I will try to start without serial cable..

Offline JRD McLAREN

  • Jr. Member
  • **
  • Posts: 10
  • BHP: 0
Re: Wrong Starting - Cranking/Afterstart
« Reply #3 on: July 17, 2012, 07:51:20 pm »
So..
nothing bootloader mode,
fuel pump is running after switch ing on...  :-\