Author Topic: questions  (Read 6086 times)

Offline Seight-v8

  • Sr. Member
  • ****
  • Posts: 339
  • BHP: 6
    • Members Page - Scott Richmond
questions
« on: May 25, 2012, 04:18:23 pm »
so ive not used my car for over a year now, due to other priorites.....house up for sale.....

And now i have some spare time again, been looking at my car & vems again.

But i now have questions as looks like things have changed.

1. Looks like i cant take any logs on my sd card without have "stuffed byte format" disabled, and now i cant get any GPS readings to save during the sdcard logging.

2. What is bootloader upgrade mean/do, is it important, as its says i need to upgrade, but i cant as its not locked.

3. oh good second lambda......but where is all the information????? about how it works and how to wire it....

I do love my vems, but i find it difficult struggling with the lack of information.

thanks for any help

scott
Engine:Rover V8 4600cc
Vems Firmware:V1.2.38, GPS, SDcard, LCD & Dual lambdas, Wasted spark, 36-1 trigger, Cam Sync & Bluetooth serial.

http://www.vems.hu/wiki/index.php?page=MembersPage%2FScottRichmond

Offline dnb

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 837
  • BHP: 19
Re: questions
« Reply #1 on: June 01, 2012, 09:24:20 pm »
I am looking at the 2nd lambda too.  It's only been around a couple of weeks, so no surprise there's no info yet.

I believe there are some oddities with 1.1.99 regarding logging.  Not sure what they are because I jumped straight to 1.2.0 (from 1.1.96) so I could have the better lambda smoothing algorithm.

Offline Seight-v8

  • Sr. Member
  • ****
  • Posts: 339
  • BHP: 6
    • Members Page - Scott Richmond
Re: questions
« Reply #2 on: June 02, 2012, 08:16:57 am »
i'll give 1.2.0 a go then, see if anything changes, ive got all the gear for a second lambda just never fitted it when i built the engine.

I know my engine/setup is still lumpy at idle, but i've been working on this while i have plenty of spare time, its better, but the lambda readings are still varying about 0.05, and the map readings 3-5kpa, maybe a small air leak somewhere.

cheers

scott
Engine:Rover V8 4600cc
Vems Firmware:V1.2.38, GPS, SDcard, LCD & Dual lambdas, Wasted spark, 36-1 trigger, Cam Sync & Bluetooth serial.

http://www.vems.hu/wiki/index.php?page=MembersPage%2FScottRichmond