for others that might have the same problem, with a none working launchcontrol in the newer firmware.
Launchcontrol vs roadspeed yes: possible to setup without a switch
So when using the launch vs roadspeed and i write 5000rpm @ 0 km/t, then this would work without any other setting ?
In new firmwares, for ALS and Launch input "inverted 0" (internal value
means "ALWAYS ON".
GenBoard/UnderDevelopment/FirmwareChanges is not clear from which firmware (1.1.75??) this was introduced. But it's obvious when using VemsTune (ini file was updated, the "always on" option added to the input selection dropdown)
before that, the chosen channel had to be pulled to 5V and chosen "inverted". (or pulled to GND and chosen).
/Skassa