siemens 870cc settings

[darzamat]

hey guys,
i'm new around here and using vems newly and i need siemens 870cc injector settings to set them up..you guys would know the specifications of 870s i guess but let me write down what i have found about them anyway.my car is golf gti (AGU) 1.8T..using 1.0.80 firmware by the way

    Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
    Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min
    Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min
    Gain: 0.11ms/mg
    Offset: 0.055ms
    Turn on time @ 14VDC: 1.14ms
    Turn off time: 0.85ms @ 600KPa
    Series: DEKA 4 ( DEKA IV )
    Orifice Type: Multi-orifice
    Spray Pattern: 30 Degree Spray Cone
    Factory fitted with Viton upper and lower o-rings



Uploaded with ImageShack.us


thank you

[darzamat]

anyone ??  ???

[MWfire]

352us
408us
4080us
800us
100%
25.5ms

[darzamat]

let me try these settings
thank you very much man