« previous next »
Pages: [1]

Author Topic: Flyback Wiring  (Read 5556 times)

Offline utkuselamoglu

  • Jr. Member
  • **
  • Posts: 22
  • BHP: 0
Flyback Wiring
« on: May 02, 2012, 08:38:48 am »
Hello,

I have vems unit with no engine harness. How do I now that there is flyback diodes inside my Case? Can I directly connect the flyback wire to pin 23?

I don't have the units configuration paper. I have only the unit.

Thank you very much.
Logged
utku selamoglu

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: Flyback Wiring
« Reply #1 on: May 02, 2012, 09:29:13 am »
You can connect - it is safe way.
If you face with heavy idle mixture control problems, then check diode presence inside ECU.
Logged
Pages: [1]
« previous next »