« previous next »
Pages: [1]

Author Topic: Bosch 3 wire idle control valve  (Read 8348 times)

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Bosch 3 wire idle control valve
« on: January 14, 2012, 10:28:46 am »
I had a look at a stock motronic setup and the duration of both sides of the control is 10ms, so 100Hz would be the correct frequency for this solenoid.

Logged

Offline stroft

  • Jr. Member
  • **
  • Posts: 16
  • BHP: 1
Re: Bosch 3 wire idle control valve
« Reply #1 on: January 15, 2012, 11:25:04 am »
Good to know !
Logged

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: Bosch 3 wire idle control valve
« Reply #2 on: January 15, 2012, 07:47:38 pm »
control pulse or control period?
Logged

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: Bosch 3 wire idle control valve
« Reply #3 on: January 15, 2012, 08:05:30 pm »
The joint control period for both sides was 10ms.

i.e 50% duty was 5ms on one side, 5ms on the other.
Logged
Pages: [1]
« previous next »