News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

changing outputs: IGBT's to logic level

Started by ZoLtaR, October 30, 2011, 07:41:21 PM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

MWfire

#15
January 22, 2012, 10:45:46 AM
yes, you need to have both 500ohm resistor(yellow and orange) for driving vag cops.

ZoLtaR

#16
January 22, 2012, 12:55:09 PM
Thanks MWFire you for your explanation of the problem. During the week I will mount resistors and will give a note if everything works as it should.

ZoLtaR

#17
January 29, 2012, 07:22:37 PM
Job's done. Resistor soldered on board and everything is ok. Thanks for you help!
Print
Go Up Pages 1 2
User actions