News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Lets talk FLYBACK..

Started by boostd audi, June 05, 2011, 05:29:18 AM

Previous topic - Next topic

boostd audi

i want to discuss FLYBACK..  i have a newer 3.6 ecu with 30v flyback that as the ts diode in it..

for flyback i just use a wire with no external diode.  Right now i only have my injectors connected to the flyback Pin 23.

I have a 4 cyl but my flyback is connected like this... AFTER THE FUSE...



my Question is..  What all needs flyback?  just devices using inj outputs?   i want to hook up my boost selonoid soon, i wired it, but i want to use flyback..  can i just use a simple flyback with a diode from +12 to the vems wire right at the plug for the selonoid?

no other flyback is need except for inj outputs? correct?

i found this picture for an iac valve with diode.. is this ok for the boost selonoid from webshop?

boost addict's Vems powered Audi VRT s2

rossi46numberone

Hi,
I wired my boost solenoid without external flyback using the EC36 pin24 high current igbt out,and it work fine.
For info it was an assembled ecu ordered.

Michele.

MWfire

Quote from: rossi46numberone on June 05, 2011, 05:30:52 PM
Hi,
I wired my boost solenoid without external flyback using the EC36 pin24 high current igbt out,and it work fine.
For info it was an assembled ecu ordered.

Michele.

you need that diode only for PWM type solenoid like IAC.

Boost solenoids are just ON-OFF.

boostd audi

#3
thanks
boost addict's Vems powered Audi VRT s2