News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

VSS

Started by Ignitec, August 11, 2011, 05:49:28 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Ignitec

VSS
August 11, 2011, 05:49:28 PM
What do I need to solder on V3.6 and 3.7 to make VSS work? I made small daughterboard for this (like http://shop.vems.hu/catalog/wheelspeed-cable-p-143.html), but there is a lot of noice. Anybody knows what's in assembled controller with VSS?
If you have everything under control, you\\\'re not fast enough!
Print
Go Up Pages1
User actions