« previous next »
Pages: [1]

Author Topic: need help for triggering config...  (Read 4630 times)

Offline rossi46numberone

  • Full Member
  • ***
  • Posts: 125
  • BHP: 4
need help for triggering config...
« on: January 24, 2011, 02:35:11 am »
Hi,
I've made some pic's about my 60-2 trigger wheel and my vemstune primary trigger page.
Can anybody tell me if my set up value are right or wrong??
http://www.box.net/shared/r6i6ivnhf1
http://www.box.net/shared/4blm0kcb92
 ::)
« Last Edit: January 24, 2011, 02:44:23 am by rossi46numberone »
Logged

Offline z0tya

  • Sr. Member
  • ****
  • Posts: 252
  • BHP: 11
Re: need help for triggering config...
« Reply #1 on: January 24, 2011, 08:26:58 am »
At first seems good, but you need always check with timing light.
(And you can make screenshot to clipboard from your dialog window with Alt+Prt Scr)
Logged

Offline boostd audi

  • Full Member
  • ***
  • Posts: 207
  • BHP: 9
    • vems.live
Re: need help for triggering config...
« Reply #2 on: July 08, 2011, 01:21:02 am »
incase anyone finds this searching

using trig tooth 0, use 79 after to tdc
Using trig tooth 4, use 54 after to tdc.

Logged
boost addict's Vems powered Audi VRT s2
Pages: [1]
« previous next »