Author Topic: interesting lcd  (Read 5979 times)

Offline z0tya

  • Sr. Member
  • ****
  • Posts: 252
  • BHP: 11
interesting lcd
« on: July 12, 2011, 11:10:17 am »
My mate send this picture from his lcd (1.1.27 ps2 vems 3.3). It produced once when he made a heavy acceleration. After reset everything seems normal. Any idea?


Offline mattias

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1075
  • BHP: 41
    • Sävar Turbo Site
Re: interesting lcd
« Reply #1 on: July 12, 2011, 11:42:46 am »
It's what you see when you have enabled PS2 and get some interference causing the ECU to react to false keypresses on a keyboard that isn't there. Worth noting is that most people run the "non-PS2" firmware, not only to get wheelspeed input instead, but because nobody uses the keyboard when you have a tuning laptop connected to the serial port.

Offline Sprocket

  • Hero Member
  • *****
  • Posts: 867
  • BHP: 29
Re: interesting lcd
« Reply #2 on: July 16, 2011, 06:17:46 pm »
I used to get all sort of junk appear like that until I used a shielded cable (an old serial cable) with a good shield drain and fitted a choke on the cable. Never had a problem after that.

Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35
Re: interesting lcd
« Reply #3 on: July 18, 2011, 09:41:54 am »
check your spark plugs, spark cables and ignition coils.