Took delivery of an Easysync / FTDI converter. Installed the latest driver from the FTDI website, Set the baud to 19200 for now and hooked up the V3. Worked an absolute treat, not one issue. hot plug and unplug, no problem. hot unplug V3 and hot plug Vems Round, no problem. Power on Power off, all good
ECU is not in the car yet though
I think that most of this reliability is down to the increasing robustness of Vemstune. I just didn't want to take any chances on the issues with the Prolific converters, even though there are little probems these days.
So, to the software developers at Vems HQ, here is a big pat on the back!, Keep up the good work, this a truely awsome package that now only needs the edges smoothing off (knock, duel WB02 or external WBO2 input)
I now have some new things to play with (iButton, I've had the chips since 2007 and not been able to do anything with it) while I'm waiting on the Knock
