Author Topic: VemsTune for Android ?  (Read 173929 times)

Offline z0tya

  • Sr. Member
  • ****
  • Posts: 252
  • BHP: 11
Re: VemsTune for Android ?
« Reply #45 on: July 03, 2012, 07:54:53 am »
This stoles the signal?

I searched for the one the use in the video about the Android set-up and could not find something useful.

No, it is not pass through, just connect one side to vems.

Offline Sprocket

  • Hero Member
  • *****
  • Posts: 867
  • BHP: 29
Re: VemsTune for Android ?
« Reply #46 on: July 04, 2012, 12:17:08 am »


Offline billman

  • Full Member
  • ***
  • Posts: 223
  • BHP: 2
Re: VemsTune for Android ?
« Reply #48 on: July 04, 2012, 07:43:39 am »
How is this connected can you post a picture for the charger thingy?

Offline billman

  • Full Member
  • ***
  • Posts: 223
  • BHP: 2
Re: VemsTune for Android ?
« Reply #49 on: July 09, 2012, 04:58:11 pm »
How is this connected can you post a picture for the charger thingy?

? You simply give 12V to one of the 4 pins?

Offline z0tya

  • Sr. Member
  • ****
  • Posts: 252
  • BHP: 11
Re: VemsTune for Android ?
« Reply #50 on: July 12, 2012, 07:39:54 am »
How is this connected can you post a picture for the charger thingy?

the bluetooth tx/rx/gnd connected to vems with the 9pin serial dsub, and the cigarette usb charger give stabilized 5V to the adapter using the top pins (only 5v, gnd)

Offline billman

  • Full Member
  • ***
  • Posts: 223
  • BHP: 2
Re: VemsTune for Android ?
« Reply #51 on: July 12, 2012, 09:04:30 am »
What cables can be used for an elegant solution?

Offline z0tya

  • Sr. Member
  • ****
  • Posts: 252
  • BHP: 11
Re: VemsTune for Android ?
« Reply #52 on: July 17, 2012, 07:52:46 am »
Yo have to dissassemble the cigarette usb regulator and solder to wire to the 5v and the gnd pin of usb connector, and simply connect them to bluetooth +- pins:
I desolder the male dsub plug (the bt adapter not work asd pass-through) and put them together in a small box.





You need to configure the BT adapter to 19200 baud, and change BT name and password, with serial terminal program.

Offline billman

  • Full Member
  • ***
  • Posts: 223
  • BHP: 2
Re: VemsTune for Android ?
« Reply #53 on: July 24, 2012, 09:08:40 am »
I bought this Arduino like yours. Can you please give the exact string to use on the terminal window in order to change baud rate ect?

*Googled a bit*
Change baud rate :

Sent : AT+BAUD1

receive : OK1200

Sent : AT+BAUD2

Receive : OK2400

1---------1200
2---------2400
3---------4800
4---------9600
5---------19200
6---------38400
7---------57600
8---------115200

Baud rate setting can be save even power down.
 
3. Change Bluetooth device name :

Sent : AT+NAMEdevicename

receive : OKname

(devicename is the name you want the device to be , and it will be searched with this name)

Name setting can be save even power down.

4. Change Pincode :

Sent : AT+PINxxxx

receive : OKsetpin

(xxxx is the pin code you set)

Pin code can be save even power down.
« Last Edit: July 24, 2012, 10:55:29 am by billman »

Offline z0tya

  • Sr. Member
  • ****
  • Posts: 252
  • BHP: 11
Re: VemsTune for Android ?
« Reply #54 on: July 24, 2012, 03:13:59 pm »
Yes these commands needed.
AT+BAUD5
AT+NAMEdevicename
AT+PIN1234 or similar.

Offline billman

  • Full Member
  • ***
  • Posts: 223
  • BHP: 2
Re: VemsTune for Android ?
« Reply #55 on: July 24, 2012, 07:15:21 pm »
for some reason it does not respond.

*Did it- commands are case sensitive*
« Last Edit: July 24, 2012, 09:31:58 pm by billman »

Offline billman

  • Full Member
  • ***
  • Posts: 223
  • BHP: 2
Re: VemsTune for Android ?
« Reply #56 on: July 25, 2012, 07:57:13 am »
Question: Must I bridge the TxD and RxD toghether? I have read it somewhere.

Offline z0tya

  • Sr. Member
  • ****
  • Posts: 252
  • BHP: 11
Re: VemsTune for Android ?
« Reply #57 on: July 25, 2012, 10:44:12 am »
Do you have menu on ICS with the new vemstune for android version?
I have not, only on 2.6.x

Offline billman

  • Full Member
  • ***
  • Posts: 223
  • BHP: 2
Re: VemsTune for Android ?
« Reply #58 on: July 25, 2012, 11:50:59 am »
Sorry I don't understand the question.


Connected it to the Android program. Now need to test it on the car :-D
« Last Edit: July 25, 2012, 03:55:32 pm by billman »

Offline billman

  • Full Member
  • ***
  • Posts: 223
  • BHP: 2
Re: VemsTune for Android ?
« Reply #59 on: July 25, 2012, 11:24:43 pm »
Did a quick try on the car and it seems to work pretty fast.