VW GTI mk3 16v turbo and 870cc

[boostd audi]

i figured i would make a build thread so i can show you guys what im workig on..

i have some pictures i will get hosted

the engine is a 2.0 with pauter rods and a 16v head that is ported with 282 cams and TT valve springs
i am back to 35r turbo now

i just got it running. with the with new head and cams and bigger turbo again

pics to come

[boostd audi]

ecu is 3.6 with 4 bar internal map using newest 1.1.92.

i did everything in the car.. all the fab work, welding, motor build, wiring, and tuning..

here are some pics

[boostd audi]

solved

[Ignitec]

Maybe it's not trigger noise, it could be sec trigger is too close to primary? What cable did you use for trigger?

[boostd audi]

no the noise is induced from coils.. i dont run second trig right now

pm me ill explain and send you a log, u can see

[boostd audi]

got my launch wired and working

installed a round display and got it setup the way i need it.

[boostd audi]

wired config switch, so i dont have to fire up the laptop every time.

i run the car on e85, however there are not alot of ethonal pumps around my area, so if i run out i can config switch and just put reg gas in it.

[boostd audi]

just got home from filling the gti and my 55 gallon drum with e85,

i get such funny looks when ppl see me filling a 55gallon drum in the back of a VW golf.. 

tuned to 360kpa now too

im suprised what 282 cams and going from a 35r to a 67mm would do.

[GTOBB]

do some  engine pics want to show your 16v
ist in mk2 chassis ?? on foto i see mk3.
in past i got ABF with GT30R and 276 schricks .

[boostd audi]

its mk3.. there were engine pictures.. i will get more up