Setting up Round Display only gauge

[mdlimy]

I installed my round display gauge today and played around a bit with setting it up and now i have a few questions.

Why is there no menu in vemstune for setting the guage up? i hate megatune :D

So I managed to get the lambda and coolant temp read out to work well and im happy with that, but i cant seem to make the kpa map and iat read correctly.
The map needs to read from between 20kpa and 200+kpa, but i cant seem to make it read like that.
The iat is completly out of whack, its a 4 digit number that i cant seem to make look correct.

Seems like all the info on the round display is kind of outdated, can someone give me some more current info and or a guide to setting it up.

Thanks
Robbie

[Erikk]

Why is there no menu in vemstune for setting the guage up? i hate megatune :D


Thanks
Robbie

There is.

Just connect the gauge to your laptop, open Vemstune and power the gauge up and it will connect.
Maybe you have to download the Round-firmwares through the firmware-web-tool.

[Sprocket]

http://www.vemssupport.com/forum/index.php?PHPSESSID=4df9470af59bd7a325ac43f6a6afc61f&topic=1240.0

[mdlimy]

yea i figured that out shortly after posting this  :D
its working great so far, i shouldnt have a problem having a toggle switch to switch between the rounds serial cable and my laptop serial cable correct?

[boostd audi]

This is useful to display AIM informations from ECU to the ROUND
For example send throttle, rpm... from a VEMS V3 ECU to VEMS round
This need some step to configure in:
1: connect to V3
2: enable AIM (Output menu/Display settings)
3: burn configuration to V3
4: connect to Round
5: set up what to show (Display menu / Main display settings) for more details see the Methods
6: burn configuration to Round
7: connect Round to V3 (with adapter)
8: reboot V3

done