News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Burned ATmega - is it possible?

Started by guzior, June 01, 2011, 03:43:21 PM

Previous topic - Next topic

guzior

Hi.
I tune on Vems C20LET engine. Someone who made wiring put on analog in channel #5 12v with 460ohm resistor. Is it possible that by this VEMS was burned?

boostd audi

you can always test with a 5v .. tap off tps wire and test it

is this not an option?
boost addict's Vems powered Audi VRT s2