« previous next »
Pages: [1]

Author Topic: Trigger log  (Read 4614 times)

Offline DMS

  • Jr. Member
  • **
  • Posts: 26
  • BHP: 0
Trigger log
« on: May 26, 2011, 06:37:36 pm »
http://www.vems.hu/files/DMS/v3.2_n000355-2011-05-02-16.23.57.triggerlog

Can someone give me an opinion?

I'm thinking my triggering is quite bad... Maybe the sensor is to close to the wheel?
« Last Edit: May 26, 2011, 06:46:45 pm by DMS »
Logged

Offline mattias

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1075
  • BHP: 41
    • Sävar Turbo Site
Re: Trigger log
« Reply #1 on: May 26, 2011, 10:14:47 pm »
With many trigger teeth the triggerlog rate will be limited by the serial port speed, in your case it's not possible to make a triggerlog with the engine running without raising the serial port speed as much as possible.

It is good enough to make a log at cranking rpm speed (200 rpm) and judging from the start of the log it looks healthy. It is definately not connected with wrong polarity.
Logged

Offline DMS

  • Jr. Member
  • **
  • Posts: 26
  • BHP: 0
Re: Trigger log
« Reply #2 on: May 27, 2011, 12:48:41 pm »
Ah I was already wondering what was going on. The start is at idle, after that the rpm's go up.
Logged
Pages: [1]
« previous next »