Author Topic: ADC channel 5  (Read 4049 times)

Offline Seight-v8

  • Sr. Member
  • ****
  • Posts: 339
  • BHP: 6
    • Members Page - Scott Richmond
ADC channel 5
« on: April 30, 2011, 08:31:59 pm »
hello all,

I cannot get ADC channel 5 in vemstune to register any readings, i know its getting 0.53v, but the vemstune gauge just shows n/a all the time.

either the rawADC of calADC shows n/a or zero all the time....

Do i have to enable anything or do something else to make it work?

thanks

scott
Engine:Rover V8 4600cc
Vems Firmware:V1.2.38, GPS, SDcard, LCD & Dual lambdas, Wasted spark, 36-1 trigger, Cam Sync & Bluetooth serial.

http://www.vems.hu/wiki/index.php?page=MembersPage%2FScottRichmond

Offline z0tya

  • Sr. Member
  • ****
  • Posts: 252
  • BHP: 11
Re: ADC channel 5
« Reply #1 on: May 02, 2011, 08:04:38 am »
with 1.1.87 and 88 you may need switch real time data option to adc/individual power at knock sampling settings