« previous next »
Pages: [1]

Author Topic: RX7 OMP Oil Metering Pump drive using Stepper Motor Outputs  (Read 10494 times)

Offline DButters

  • Jr. Member
  • **
  • Posts: 67
  • BHP: 2
RX7 OMP Oil Metering Pump drive using Stepper Motor Outputs
« on: May 09, 2011, 10:45:11 pm »
Hi Guys,

I am in the process of building up a plug-in adapter for s6 FD3S RX7, and would like to know if the stepper motor drivers can be allocated to a load/RPM based drive for the oil metering pump, or will it only work for idle control?

The pump also has a feedback output (analog) for position verification, can this be used in the current firmware?

As an aside, I will post the proposed pin mapping for the plug in board in the appropriate forum section if anyone is interested.
Logged

Offline jrussell

  • VEMS USA
  • Administrator
  • Full Member
  • *****
  • Posts: 224
  • BHP: 15
    • VEMS USA
Re: RX7 OMP Oil Metering Pump drive using Stepper Motor Outputs
« Reply #1 on: May 10, 2011, 06:17:28 am »
No, never been done. Most people remove that pump in lieu of a manual pump or more commonly, premixed gasoline.
Logged
VEMS USA - Located in beautiful Burlington, Vermont
1988 RX7 Turbo

Offline DButters

  • Jr. Member
  • **
  • Posts: 67
  • BHP: 2
Re: RX7 OMP Oil Metering Pump drive using Stepper Motor Outputs
« Reply #2 on: May 11, 2011, 09:59:31 am »
Quote from: jrussell on May 10, 2011, 06:17:28 am
No, never been done. Most people remove that pump in lieu of a manual pump or more commonly, premixed gasoline.

Thanks for the info - I realise that there are a number of options other than controlling it correctly, but with a fully configurable ECU I would like to retain this functionality if possible.

Does anybody who deals with the firmware know if it would be possible to add a load/rpm table to control stepper motor position? I am happy to assist with the firmware if there is EEPROM space for the table and sufficient CPU capability to use it?
Logged

Offline boostd audi

  • Full Member
  • ***
  • Posts: 207
  • BHP: 9
    • vems.live
Re: RX7 OMP Oil Metering Pump drive using Stepper Motor Outputs
« Reply #3 on: May 23, 2011, 03:03:51 am »
he would know rx7 part numbers are in his veins
Logged
boost addict's Vems powered Audi VRT s2

Offline DButters

  • Jr. Member
  • **
  • Posts: 67
  • BHP: 2
Re: RX7 OMP Oil Metering Pump drive using Stepper Motor Outputs
« Reply #4 on: June 05, 2011, 07:15:01 am »
Quote from: boostd audi on May 23, 2011, 03:03:51 am
he would know rx7 part numbers are in his veins
Sorry not sure what you mean here?

I am proposing adding a small load vs rpm table to control stepper motor position.
Logged
Pages: [1]
« previous next »