« previous next »
Pages: [1]

Author Topic: ae110 4age black top  (Read 5282 times)

Offline VTECH bully

  • Jr. Member
  • **
  • Posts: 5
  • BHP: 0
ae110 4age black top
« on: April 03, 2011, 10:36:58 pm »
who can make a loom that is plug compatable to the ae100 loom. want to make the v3 plugin into a small loom similar to a pnp ???
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: ae110 4age black top
« Reply #1 on: April 04, 2011, 09:39:34 am »
Have you got a picture of the ECU plug?
Personally I'd avoid using the 20year old wiring of your existing loom and make a lightweight ecu loom.
Logged

Offline VTECH bully

  • Jr. Member
  • **
  • Posts: 5
  • BHP: 0
Re: ae110 4age black top
« Reply #2 on: April 05, 2011, 03:04:13 am »
Ok. A loom with only injectors, triggers, sensors And coils. Simple and effective
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: ae110 4age black top
« Reply #3 on: April 05, 2011, 08:41:14 am »
Thats what I ended up doing for the guys who put the 20v engines in the AE86 chassis.
It was easier in that case as the "chassis loom" (connects to alternator, oil pressure, water temp, dash) was easily separated from the ECU loom.
Logged

Offline VTECH bully

  • Jr. Member
  • **
  • Posts: 5
  • BHP: 0
Re: ae110 4age black top
« Reply #4 on: April 09, 2011, 04:24:28 am »
any one with an idea for a secondary trigger wheel setup for the 4age
Logged
Pages: [1]
« previous next »