News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Question about 60-2 trigger with camsyns and VR polarity (logs inside)

Started by ZoLtaR, March 16, 2011, 07:29:52 PM

Previous topic - Next topic
Print
Go Down Pages 1 2 3
User actions

ZoLtaR

#30
March 27, 2011, 04:15:04 PM
Allright, finally I get it to work properly. According to coil wiring ignition table now looks like below and everything works well. Every ignition event is now where it have to be. Marks on cam gear helped a lot.

4
3
1
2

Big thanks to mattias.
Print
Go Up Pages 1 2 3
User actions