« previous next »
Pages: [1]

Author Topic: Instantaneous fuel consumption (BMW E36)  (Read 6211 times)

Offline Gep

  • Jr. Member
  • **
  • Posts: 2
  • BHP: 0
Instantaneous fuel consumption (BMW E36)
« on: February 18, 2011, 08:08:46 am »
Hello!

 Is it possible that the instantaneous fuel consumption meter work with VEMS ecu?
There is no consumption data so that the instrument cluster not work and the on board computer does not work.

VEMS ECU in the car with 1.1.27 firmware.
1994/7 BMW E36 318is with M42b18 engine.

Thanks for everything!

Hi!
Logged

Offline jrussell

  • VEMS USA
  • Administrator
  • Full Member
  • *****
  • Posts: 224
  • BHP: 15
    • VEMS USA
Re: Instantaneous fuel consumption (BMW E36)
« Reply #1 on: February 19, 2011, 05:11:12 pm »
What does the instrument cluster require for a signal? Without this information, it's hard to say whether it's possible or not.
Logged
VEMS USA - Located in beautiful Burlington, Vermont
1988 RX7 Turbo

Offline Erikk

  • Jr. Member
  • **
  • Posts: 95
  • BHP: 7
Re: Instantaneous fuel consumption (BMW E36)
« Reply #2 on: February 19, 2011, 05:47:28 pm »
Hi!


Check out Mattias MembersPage in the wiki, he has done some research on this.

..MattiasSandgren/BmwEconoMeter


MVH
Logged
Sweden - erik.englund@gmail.com

Offline Gep

  • Jr. Member
  • **
  • Posts: 2
  • BHP: 0
Re: Instantaneous fuel consumption (BMW E36)
« Reply #3 on: September 19, 2011, 08:52:55 am »
Quote from: Erikk on February 19, 2011, 05:47:28 pm
Hi!


Check out Mattias MembersPage in the wiki, he has done some research on this.

..MattiasSandgren/BmwEconoMeter


MVH

Thank you very much!
Logged
Pages: [1]
« previous next »