News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

message error issue

Started by rossi46numberone, February 13, 2011, 07:47:43 PM

Previous topic - Next topic

rossi46numberone

Hi,
On my message list box i read this :
injector table bins need to be 720 degree if secondary trigger disabled!
But when i put 720 everywhere on the grid,the first top box always return on 210,even if I burn data ....
What's wrong,the firmware is the latest version 1.1.88 ???
Michele.