problems with 3 wire coils

[Kamuto]

hello, have one question, can vems igbt chanels drive these coils http://img.photobucket.com/albums/v289/jerbil/19022005971.jpg ? they are 3 pin from bmw. thanks what dweel time must be used?

[mattias]

They should be fine, looks like the regular coil on the 24 valve engines, but there is no way I can tell you more from just a picture.

Measure the primary winding, should be 0.5-1.0 Ohm normally if they don't have built-in igniters.

Start out with 2.0 ms and go from there, use 10A fuse.

[Kamuto]

yes this is  the same coil, ok thanks. I just get very weak spark, but it is on the table so I think it's because of weak power supply. thanks ;)