ignition issue VW 1.8T,2 cylinders runing....

[rossi46numberone]

Hi,
Try to start the engine but it run on 2 cylinders only.First i've try by the Ec 18 steppers output,then with the Ignition Ec36 output,swap the ignition order firing and nothing works and the exhaust smell fuel.
Ps :output drive a N122 Bosch igntion module,Vems config ignition 4+4.
The coils checked,injectors too and the engine run fine with my Bosch Oem ecu.
help,help.... ???

[GintsK]

May be post your config file?

[rossi46numberone]

Hi,
The engine start and idle on his four cylinders,the solution?
I've pull off the ignition amplifier module and drive the coil directly from the igbt output (Ec36).
It works,now I have to tune all my fuel,ignition,lambda,enrichment tables....