« previous next »
Pages: [1]

Author Topic: VEMSTune from Celsius to Fahrenheit  (Read 6501 times)

Offline amd is the best

  • Jr. Member
  • **
  • Posts: 23
  • BHP: 1
VEMSTune from Celsius to Fahrenheit
« on: February 02, 2011, 09:38:23 pm »
Hey Guys,

New here and new to VEMS but not new to standalone EMS/tuning.  I am ordering up a VEMS unit from Marc at EFIExpress for my 1991 Audi 200 20v (3B) and have been playing with the software (VEMSTune) a bit to familiarize myself with it.  I can't seem to figure out an easy way to switch the entire software over from Celsius to Fahrenheit.  Is this possible?

Thanks in advance,
Nick
Logged
'10 VW TDI
'01 Audi S4
'91 Audi 200 20v (VEMS vehicle)

Offline Jim_W

  • Jr. Member
  • **
  • Posts: 32
  • BHP: 5
Re: VEMSTune from Celsius to Fahrenheit
« Reply #1 on: February 03, 2011, 10:57:55 pm »
In VemsTune:
File -> Firmware Parameters -> set "CELCIUS" to 0 (zero).  Not exactly where you would think to find it.

Logged

Offline amd is the best

  • Jr. Member
  • **
  • Posts: 23
  • BHP: 1
Re: VEMSTune from Celsius to Fahrenheit
« Reply #2 on: February 03, 2011, 11:10:35 pm »
Thank you for the response.  That didn't seem to change anything over though, even after the recommended restart.
Logged
'10 VW TDI
'01 Audi S4
'91 Audi 200 20v (VEMS vehicle)
Pages: [1]
« previous next »