« previous next »
Pages: [1]

Author Topic: VAG 1.8t AEB Injector Opening Time  (Read 6816 times)

Offline Jim_W

  • Jr. Member
  • **
  • Posts: 32
  • BHP: 5
VAG 1.8t AEB Injector Opening Time
« on: January 31, 2011, 12:34:10 am »
Anyone have good injector latency (Injector open time @ 13.2V) settings for VAG 1.8t AEB injectors?  Bosch part number 280 150 447, 210cc/min.

Thanks
Logged

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: VAG 1.8t AEB Injector Opening Time
« Reply #1 on: January 31, 2011, 06:59:37 pm »
look here. http://www.usrallyteam.com/content/products/injector/Bosch_Injector_data.xls
with no lag in 2.5ms it would inject 7mg in 2.5ms
practically - 5.63mg

5.63mg relates for 2.011ms if lag is subtracted.
So lag time becomes 2.5-2.011=489us
But: it is 1) for 300KPa 2)for unknown (I suppose higher) flyback voltage. 3) unknown voltage
« Last Edit: January 31, 2011, 07:04:14 pm by GintsK »
Logged

Offline Jim_W

  • Jr. Member
  • **
  • Posts: 32
  • BHP: 5
Re: VAG 1.8t AEB Injector Opening Time
« Reply #2 on: January 31, 2011, 09:59:53 pm »
Excellent.  Thanks.

How did you find the 2.011ms and 7mg figure?  Are there better descriptions of of the column titles anywhere?  What is "g/1000 Imp."?  Grams per thousand... what?

This is a good starting point even though I'll be turning the pressure up to 4 bar.

Logged

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: VAG 1.8t AEB Injector Opening Time
« Reply #3 on: February 01, 2011, 04:50:05 pm »
Grams per 1000x2.5ms pulses.
I calculated static grams per 1000x2.5ms=2.5s. And so find dead time. But it is just for reference.
« Last Edit: February 01, 2011, 09:10:13 pm by GintsK »
Logged
Pages: [1]
« previous next »