VEMSTune from Celsius to Fahrenheit

[amd is the best]

Hey Guys,

New here and new to VEMS but not new to standalone EMS/tuning.  I am ordering up a VEMS unit from Marc at EFIExpress for my 1991 Audi 200 20v (3B) and have been playing with the software (VEMSTune) a bit to familiarize myself with it.  I can't seem to figure out an easy way to switch the entire software over from Celsius to Fahrenheit.  Is this possible?

Thanks in advance,
Nick

[Jim_W]

In VemsTune:
File -> Firmware Parameters -> set "CELCIUS" to 0 (zero).  Not exactly where you would think to find it.

[amd is the best]

Thank you for the response.  That didn't seem to change anything over though, even after the recommended restart.