Recalibrating map sensor offset

[Dylan@AM Racing]

I suspect my wideband config is not right. If I set the fueling at idle that it barely wants to idle due to the richness (10.4:1 on PLX) I only get a lambda of 0.85..... and my PLX is 600mm+- from the turbo and my Vems wideband is 200mm from the turbo. I'm just looking for my config file sent when I got the system.

[mattias]

Send a mail to info @ vems.hu and ask for the calibration numbers for your ECU (give them the serial nr).

[Dylan@AM Racing]

Found them

> Board_version=v3.3
>
> Serial_nr= 2066
>
> pump-= 3.96V
>
> wbo2_pump_pw_zero=0x64
>
> wbo2_nernstdc_target=0x87
>
> pump+= +2.3mV/200 Ohm
>
> AREF=4.9V
>
> (C103=1nF, no D100)
>

[GintsK]

Found them

> Board_version=v3.3
>
> Serial_nr= 2066
>
> pump-= 3.96V
>
> wbo2_pump_pw_zero=0x64
>
> wbo2_nernstdc_target=0x87
>
> pump+= +2.3mV/200 Ohm
>
> AREF=4.9V
>
> (C103=1nF, no D100)
>

It means pump zero PW =100
and nernst DC target = 135

all rest values - default! Check that!
except Sensor free air calibration. You have to perform it.