Technical > Wiring & Sensors

Shift down light, any sugestions?

(1/1)

se7ensport:
How do I run more than one shift light from VEMS? I'd like a second one that comes on when I'm at a safe RPM to down shift i.e. it stays on from zero rpm upto 4500, but then goes out.

I'm already using  EC36pin4 P259 chan 0 for my standard shift light and can't see a second option within megatune, or can I just select  EC36pin3  P259 chan 4 and EC36pin 4 will still work? if so how do I wire it up?


suggestions appreciated


Alex

rob@vems.co.uk:
Yes :)

Using one Extras->MiscOutput Settings you can set the RPM, TPS and MAP levels, and the channel you want to activate.  Then wire according to the pin out chart below, if you select p259 ch0 then use EC36pin4, and wire the same way as you did your shift light (see picture below the pin chart...

se7ensport:
Splendid  :)

Navigation

[0] Message Index