News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Vems on GOLF MK4 1.8T 20V, AGU engine....

Started by rossi46numberone, November 18, 2010, 10:30:02 PM

Previous topic - Next topic

boostd audi

#15
i like the newer 4 wire coil packs vs the old bolt down 3 wire.. seem to make more power with the 4 wires.

if you need a basemap config let me know i can send you one as well

you need a 1 window hall cam sensor to run fully sequential fuel.. otherwise just fire the coils wastespark in meantime using dual output

the correct primary trigger setting to use are, frist trig tooth 0 and 79 degreed after to tdc
boost addict's Vems powered Audi VRT s2