trigger errror, too many pri trigger

[mattias]

Try uploading a compressed zip-file. The file upload doesn't allow just any file name ending (.zip works).

[Denmark]

no luck,

I belive that i have to be a linux nerd to use the wiki pages, and i´m sorry i cant get it to work,
When i press upload the side goes changes for 5sec, and then returnes, but there is no file uploaded,

Or it is not showing on that page with the 166 other files


/Skassa

[mattias]

This has nothing to do with Wiki or anything...
Just go here, log in with vems/vems :
http://www.vems.hu/filethingie.php

Create your own subdirectory, upload files. Right click on a file, copy link, paste link here, done.

[Denmark]

I dont know if you can download this, but here i can atleast upload files,

triggerlog :

http://www.2shared.com/file/-zrPIJz4/v33_n003580-2010-12-15-201256.html

log file :
http://jump.fm/GYSPJ

[mattias]

I use Firefox and I can't see any download link anywhere. Together we suck at the internet.

[Denmark]

 


i hope for the machine shop to (monday)be able to make me some laser cut 36-1 triggerwheels to mount on the oe triggerwheel, like i have done in the past.
this have always been the rescue before, and hope it will be this time too.
and i most think hard about just dropping the subarutrigger setup in the vems, as its just not cable of running the subaru´s right.

So i hope that this will be the cure, and not another vems board hardware problem,
But i have now told the costumer that he cant have the car this weekend..



/Skassa

[Denmark]

If i move the cam sensor closer to the triggerwheel i Can get it to run 7500rpm, but this is when the sensor touches the wheel,
What Can i change inside the Vems to make the same effect?

Thanks
Skassa

[peter_jensen]

Remove R59. As some of the pcb´s have strung 1K pull down. Then you will have a nicely running car

[Denmark]

this was the problem


It working now and the impreza will happely run the 8000 rpm that is needed


Thanks,
Skassa