News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Cam sensor setup vw 16v

Started by blown_g, September 20, 2010, 02:45:30 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

blown_g

September 20, 2010, 02:45:30 PM Last Edit: September 20, 2010, 10:42:50 PM by blown_g
This goes out to those people who are running the cam sync on the 16v vw motor.  I tried on using the stock cam hall sensor (1 missing tooth) wheel but with no luck in detecting a signal.

Does the stock cam (hall) sensor and wheel work ok with VEMS?



Print
Go Up Pages1
User actions