Author Topic: Anti Lag  (Read 5926 times)

Offline SierraCos2wd

  • Jr. Member
  • **
  • Posts: 26
  • BHP: 1
Anti Lag
« on: September 23, 2010, 09:11:36 pm »
Am running firmware 1.1.81
Just wondering what i should write in the antilag meny if i should use it? Do i need to use iac valve?

Could someone tell me about it?

Regards
Tom Andrè
Ford Sierra Cosworth<br />Powered by VEMS

Offline Erikk

  • Jr. Member
  • **
  • Posts: 95
  • BHP: 7
Re: Anti Lag
« Reply #1 on: September 23, 2010, 09:19:36 pm »
Am running firmware 1.1.81
Just wondering what i should write in the antilag meny if i should use it? Do i need to use iac valve?

Could someone tell me about it?

Regards
Tom Andrè

First you´ll probably have to decide how to add air.

Manually fix the throttle a bit open, use a kicker solenoid or using an (probably need 2 or 3) iac valves.
Sweden - erik.englund@gmail.com

Offline SierraCos2wd

  • Jr. Member
  • **
  • Posts: 26
  • BHP: 1
Re: Anti Lag
« Reply #2 on: September 23, 2010, 09:34:26 pm »
could`nt it only be used to get a lower ignition when you let of the throttle after a run to get some (flames,bangbang) without given more air into the cylinders? 
Is that possible?
I now how the antilag works.But i just wondering if it is possible to get the noise without iac valve.

And another problem.
No i use soft ignition (with hard spark cut) cut for rev limiter. But it dont will be any bangbang. when i used the older 1.0.73final firmware with megatune i got some big noisy bangbang sound when i rev out the engine.
How could i get that now? 

Maybee it sounds like am 13years old, but i just think that sounds is so cool.

thanks,
Ford Sierra Cosworth<br />Powered by VEMS