Pls check somebody my 1.1.81 config for C20LET with CAM trigger ?

[Pet]

I've moved this post from my project page, here's better place to solve this basic setting:
 Engine Opel C20LET,

 - 60-2 + CAM, for now wasted spark 
 - spark order is     : 1-3-4-2
 - injection order is : 3-4-2-1  ??OK??

then h[] tables:

 h[0] = 01 02 08 04 00 00 00 00  ; out1=cyl1, out2=cyl2....
 h[1] = 00 5A 3C 1E 00 00 00 00 ; or it's reversed 1E 3C 5A 00 ??  60-2 + CAM
 h[2] = 00 10 00 10 00 00 00 00 ; 00=I259-0=cyl1&4, 10=I259-1=cyl2&3

 h[3-5] is what ??

 it means, cycle start with injection to cyl 3 and spark on the cyl2(3)  is it correct ??
 
Thanks a lot.
 

[mattias]

Have you got the engine running without cam sync yet?

Don't complicate things before the basics work. You can enable cam sync later and complicate things then.

[Pet]

Have you got the engine running without cam sync yet?

Don't complicate things before the basics work. You can enable cam sync later and complicate things then.

Yes, with 1.0.78 it was running without CAM sync. Now I want to use 1.1.x fw's due new features + then COPs.

[gunni]

Then run it cam-sync less first on new firmware
then add camsync