no trigger after upgrade (SOLVED)

[[email protected]]

Ah! Just a sudden thought.
Didn't we have to do something with a relay to get power up and on?
It might be worth checking that there is in fact voltage at the CAS.

Rob

[s14nismo]

Ok guys, i managed to try out the settings suggested by Mattias (and reconnect the coolant sensor, but still no trigger.

  Rob, wasn't that relay just to give the vems a direct power feed to the battery?, i cant really remember. I do however have voltage at the CAS and i can see the voltage switching on my DVM.

I notice when i try to use the 'record trigger log' i only get a blank grey background screen, not a blue band as it shows on the demo video posted earlier, dont know if this is relevant?

[mattias]

Does the "received bytes" counter increase when you are logging from the ECU?

[s14nismo]

I had the chance to get back on the car this week and it seems that my lost trigger is down to my ECCS relay not switching.
The problem was that i'd missed the activation of misc1 output when copying my settings from the old fimware, which was grounding said relay!

Thanks guys for your help, i have another question or two but will start another thread in a more relevant section.

Thanks again, Scott

 

[[email protected]]

Thanks for letting us know.

I might be begging you for your config as I have an upgrade to do on Docwra's SR20DET engined S13

[s14nismo]

I might be begging you for your config as I have an upgrade to do on Docwra's SR20DET engined S13

As soon as i get a working config you'll be more than welcome Rob! ;)

I'm still havin trouble gettin a spark atm! :(

[[email protected]]

Gunni got Docwra's one up and running yesterday, made some okay power at 1.1  still more to do as its not idling nicely, and the TPS is faulty.  I think some grounding wire work is needed.