Author Topic: Audi S2 speed sensor  (Read 9506 times)

Offline Jamo

  • Full Member
  • ***
  • Posts: 129
  • BHP: 6
Audi S2 speed sensor
« on: September 14, 2010, 02:33:30 pm »
Does anyhow know if the vems can integrate with the Audi s2 for the speed sensor input?

If so any connection details?

Offline lugnuts

  • Full Member
  • ***
  • Posts: 249
  • BHP: 2
Re: Audi S2 speed sensor
« Reply #1 on: September 14, 2010, 05:22:21 pm »
Audi is usually a reed switch input.

Do you have the VEMS Motronic PnP ecu?  Or did you wire in a standard v3?

Offline Jamo

  • Full Member
  • ***
  • Posts: 129
  • BHP: 6
Re: Audi S2 speed sensor
« Reply #2 on: September 14, 2010, 05:32:27 pm »
Mine is a wired in V3 with a loom adapter

Offline Erikk

  • Jr. Member
  • **
  • Posts: 95
  • BHP: 7
Re: Audi S2 speed sensor
« Reply #3 on: September 14, 2010, 07:21:31 pm »
Mine is a wired in V3 with a loom adapter

Check your configuration paper you got with your ECU or send a mail to Hungary and see if you have wheelspeed input in it.

It´s almost standard nowadays so if its a quite new ecu you should have it.
Sweden - erik.englund@gmail.com

Offline Jamo

  • Full Member
  • ***
  • Posts: 129
  • BHP: 6
Re: Audi S2 speed sensor
« Reply #4 on: September 14, 2010, 07:46:36 pm »
that's not the information I'm after in this request, where do you get the wheel speed input from on the S2?

Offline Erikk

  • Jr. Member
  • **
  • Posts: 95
  • BHP: 7
Re: Audi S2 speed sensor
« Reply #5 on: September 14, 2010, 07:58:13 pm »
that's not the information I'm after in this request, where do you get the wheel speed input from on the S2?

Sorry for the misunderstanding. It´s motronic pin 50 if its a ABY, AAN or ADU.
Sweden - erik.englund@gmail.com

Offline Jamo

  • Full Member
  • ***
  • Posts: 129
  • BHP: 6
Re: Audi S2 speed sensor
« Reply #6 on: September 14, 2010, 08:04:03 pm »
Ah o.k so your confirming pin 50 vss and this is compatible with the speed sensor in vems?  ;D

http://www.s2central.net/motronic_pinout_ABY.html

Anyone know the configuration of the speed sensor in VEMS to match the VSS input

Offline Erikk

  • Jr. Member
  • **
  • Posts: 95
  • BHP: 7
Re: Audi S2 speed sensor
« Reply #7 on: September 14, 2010, 09:12:34 pm »
Ah o.k so your confirming pin 50 vss and this is compatible with the speed sensor in vems?  ;D

http://www.s2central.net/motronic_pinout_ABY.html

Anyone know the configuration of the speed sensor in VEMS to match the VSS input


http://www.vems.hu/wiki/index.php?page=MembersPage/MarcellGal/PowerAndTraction/SpeedoMeter

Thats a 3B though, but it´s probably same same..
Sweden - erik.englund@gmail.com

Offline Jamo

  • Full Member
  • ***
  • Posts: 129
  • BHP: 6
Re: Audi S2 speed sensor
« Reply #8 on: September 14, 2010, 09:17:33 pm »
Excellent I have ammunition to go to my supplier now to help sort it out, great stuff