Audi S2 speed sensor

[Jamo]

Does anyhow know if the vems can integrate with the Audi s2 for the speed sensor input?

If so any connection details?

[lugnuts]

Audi is usually a reed switch input.

Do you have the VEMS Motronic PnP ecu?  Or did you wire in a standard v3?

[Jamo]

Mine is a wired in V3 with a loom adapter

[Erikk]

Mine is a wired in V3 with a loom adapter

Check your configuration paper you got with your ECU or send a mail to Hungary and see if you have wheelspeed input in it.

It´s almost standard nowadays so if its a quite new ecu you should have it.

[Jamo]

that's not the information I'm after in this request, where do you get the wheel speed input from on the S2?

[Erikk]

that's not the information I'm after in this request, where do you get the wheel speed input from on the S2?

Sorry for the misunderstanding. It´s motronic pin 50 if its a ABY, AAN or ADU.

[Jamo]

Ah o.k so your confirming pin 50 vss and this is compatible with the speed sensor in vems? 

http://www.s2central.net/motronic_pinout_ABY.html

Anyone know the configuration of the speed sensor in VEMS to match the VSS input

[Erikk]

Ah o.k so your confirming pin 50 vss and this is compatible with the speed sensor in vems? 

http://www.s2central.net/motronic_pinout_ABY.html

Anyone know the configuration of the speed sensor in VEMS to match the VSS input

http://www.vems.hu/wiki/index.php?page=MembersPage/MarcellGal/PowerAndTraction/SpeedoMeter

Thats a 3B though, but it´s probably same same..

[Jamo]

Excellent I have ammunition to go to my supplier now to help sort it out, great stuff