Default gauge display

[Ellisd]

I'm wanting to have my gauge disply AFR and EGT as it's startup display, then "analogue in" when the button is pressed.  However, it doesn't matter what I do in Vems tune, the analogue in is always the screen that comes on when the key is turned 

[rob@vems.co.uk]

Are you using the new firmware version?  Theres some stuff about which "slot" shows which function.

[Ellisd]

As far as I know it the last version without the AIM support  (downloaded it about a month or so ago). I tried alternating the 2 display i wanted over the 8 slots (afr-egt, afr-ana, afr-egt......ect) But no matter which way round i had them it would always start on the afr-ana display.  I even just tried allocation only the 1st 2 slots and leaving the others blank, but that didn't work either :-(  It's not the end of the world if I have to push a button to get EGT, but i would have liked for it to just do it automatically

[rob@vems.co.uk]

I had a whole load of issues with the display, I found that the slot I thought I was starting in was completely wrong! As theres no actual way of knowing...

[Ellisd]

With the firmware version i've got it actually shows you what slot you're on.  It seems to have a mind of it's own because it'll start on any slot it wants (only the anal in though lol)

[DI-Racing]

sounds painfull dude,,am having issues with rpm readout on the round and the dash,,could be earthing related,or witchcraft,not sure,,,,

[Ellisd]

Problem solved.  Adjusted the anal in button threshold and the display now powers up on the same slot everytime.