Author Topic: 8 injectors on a 4 cylinder  (Read 19499 times)

Offline Sprocket

  • Hero Member
  • *****
  • Posts: 867
  • BHP: 29
Re: 8 injectors on a 4 cylinder
« Reply #15 on: July 30, 2010, 07:20:21 pm »
We are talking about this? Yes? :)

http://www.youtube.com/watch?v=viMG-Z2cGfo&feature=channel

Injector staging is possible yes, but have you seen the front of John Hastons car recently :-X not that you will have the same problem with a clubman front ;)

 Its basicaly a dry nitrous system. It may get unstuck and melt something, even with as little as 25hp N2O. The higher the rpm the more likely to loose a piston or two if it runs lean and that is a 9krpm engine. Ask me how I know ;D Im sure Trevor would have something to say about it :D

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: 8 injectors on a 4 cylinder
« Reply #16 on: July 30, 2010, 07:58:02 pm »
That is fun to watch

Offline miniminor63

  • Jr. Member
  • **
  • Posts: 68
  • BHP: 1
Re: 8 injectors on a 4 cylinder
« Reply #17 on: July 31, 2010, 02:32:14 am »
oops, totally forgot the link obviously.

I am not planning on NOS luckily, as it is banned in the racing series.

If I end up with a nose extension/airfilter outside of the grille, even on a clubman I dont care really.

So, this is something I could think about implementing on the car without worrying if VEMS have the capabilities?


Offline Sprocket

  • Hero Member
  • *****
  • Posts: 867
  • BHP: 29
Re: 8 injectors on a 4 cylinder
« Reply #18 on: July 31, 2010, 09:25:58 am »
Yes, injector staging is functional. There are a few who are using it. Later firmwares have better implementation and whats more, there is some documantation for a change :)