AlphaN vs RPM(KPA) based ignition

[psychip]

Hello guys, my setup is fiat coupe 2.0 16v wasted spark+dual injection. currently my VE table based on kpa (rpm) but ignition Y axis still reading from TPS.

my problem is engine extremely overheating, my primary suspect is ignition advance. so my question is, should i switch to kpa/rpm instead of tps or just reduce the values of ignition table?

the configuration file is attached

configuration
https://drive.google.com/file/d/1aOPPrmcOU87BVjODwF-cz701VegC07w1/view?usp=sharing

screenshot
https://drive.google.com/file/d/1MAmoB2Sv5XwmXVnrvyB79JX4ppZBjAgA/view?usp=sharing