cam sync - requirements

[Seight-v8]

hello all,

So been browsing the wiki for a while trying to find out what i actually need in the way of pulses/triggering to get cam sync working correctly.

So far i have a cam sprocket with 4 slots in....which i am looking to modifiy to use the cam sync.

I have a VR sensor that works.

But i am struggling to find/understand the VEMS configuration/setup of whats required to make it work.....

Ie do i need one pulse or four for the V8 engine, and how do i tell the vems when its to fire the injector.....hmmm so many unanswered questions.

anyone care to point me to some understandable information.

cheers

scott

[[email protected]]

One pulse will be fine, all it does is reset the trigger sequence when the trigger is seen.
You want to start off with a raw trigger value of 25 (0x19)