News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Heat soak

Started by Denmark, June 30, 2010, 09:03:00 AM

Previous topic - Next topic

Denmark

Hi All.

I have a problem when starting the engine after it have been runing normally, and you turn of the car for aprox 15min,

then the idle will be all over the place for 30sec, jumping up and down.

in the older megatune, it would be okay, when just upping the fake air scale.

Any suggestens to try to correct this?

/Skassa
working on the boxer

z0tya

mat/tps enrichment table if you use 1.1.7x fw