I'm wondering who is using the SD Card logger as often as I do, and what your experiences are.
I'm using 1.1.70 and 1.1.74 Firmware, and VemsTune 4-28
I see two problems.
1) Log Saving:
The logs save properly on the first try only about 25%-50% of the time.
When it doesn't work - the blue progress bars will not show any progress, and the "saved" window will pop up.
(A file name is created, but it will be empty)
When it does work - the progress bar will go from 0-100% in "chunks", so I'm not sure if the software
is running poorly on my computer that might be causing this.
I don't have any other programs running on the computer when I save the logs.
2) Log titles/number of logs:
I will often see 3 logs created after an erase-start - even though the engine was started only one time
since the erase-start procedure.
And the logs are titled with (I assume) the number of minutes/seconds of log time. But I get logs with,
for example, 8:42 even though the log time is only 2-3 minutes. Then there will be 2 other logs of only :15 of :30
or so each, with nothing in them.
I don't think the ecu or SD card stops working due to vibration. Because the run (drag racing) shows up fine in the datalog (when I can finally find it)
Has anyone else had this happen?
