Strange entry in log file.

[Agriv8]

I have just got arround to checking my log files from last night ( a steady 14 milr run over to MNR headquaters ) as I have a problem on my NSF corner that I wanted marc to have a look at.

everyting is fine ( ok my fueling is still out but I know about that ) no trigger errors which is good.

My query is I have a point on the vemslogview where everything drops to 0 the corresponding lines in the log looks like

1160.57   20   2769   40.3   12   1.14   31.1   81.1   1   103   96   100   100   100   0   74   4.7   6   10.8   1.012   29   2.94   0   0   13.76   0   0   0   0   0   0   1000000   0   4
MARK 001 manual 2007-05-01T17:07:22+01:00                                                                                                   
1160.746   20   2759   37   12   1   31.1   81.1   1   103   96   100   100   100   0   73   4.3   6   9.9   1.02   29   2.94   0   0   13.65   0   0   0   0   0   0   1000000   0   4

I.e. suddenly get a line with 'MARK 001 manual 2007-05-01T17:07:22+01:00' which would be the time that the log was being created and nothing else on the line. might be because the laptop tried to go to sleep or somthing.

As I have finally got the VEMS up and running just wandered if anyone else has had anything similar ?

Will be doing the run again friday to hopefully fit some decent front uprights and 4 pot calipers so might try switching the sleep mode off on the laptop to see if that changes anything.

Regards

Agriv8

[dnb]

I got those "Mark" lines from time to time too.  They seemed to come from 2 sources - power loss to the ECU (eg I turned the key off and on again because the cold start didn't) or as you surmise the laptop trying to go to sleep and Megatune thinking this is a new log or the ECU has been reset.  I suspect it isn't anything more serious, as I managed to get rid of my problem.