« previous next »
Pages: [1]

Author Topic: Mitsubishi EVO 1-3 trigger supported?  (Read 6410 times)

Offline Ascona 400

  • Jr. Member
  • **
  • Posts: 22
  • BHP: 2
Mitsubishi EVO 1-3 trigger supported?
« on: August 25, 2010, 09:08:17 am »
Is the stock trigger on a Evo 1-3 supported by the firmware?
As far as I can find, it doesn't look like it would be supported..
 
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Mitsubishi EVO 1-3 trigger supported?
« Reply #1 on: August 26, 2010, 12:53:10 am »
Is this the 'egg beater' crank based trigger?
Logged

Offline Ascona 400

  • Jr. Member
  • **
  • Posts: 22
  • BHP: 2
Re: Mitsubishi EVO 1-3 trigger supported?
« Reply #2 on: August 26, 2010, 02:33:20 am »
That is a good question..
It's not my car, but I did have a quick look on the engine when it was swapped and as far as I saw then, it didn't look like there was any trigger on the crank.
Could it be that it only have a cam driven trigger?

I'll have a look once more to be sure how the trigger looks!
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Mitsubishi EVO 1-3 trigger supported?
« Reply #3 on: August 26, 2010, 03:40:01 am »
A lot of earlier Japanese cars had EFI retro-fitted, so they modified distributors rather than redesign crank assemblies to add triggers.
It seems that they've only relatively recently moved over to crank triggers - probably as a result of variable cams.
Logged
Pages: [1]
« previous next »