Temperature Sensor Configuration

[MWfire]

I can make calibration file for your sensor. But you will need to change one resistor(pull up).

[z0tya]

Can i do the pullup outside the vems box? Or just internal.
I don't want to dissasemble the box.

[MWfire]

Can i do the pullup outside the vems box? Or just internal.
I don't want to dissasemble the box.

internal. I can make calibration file for serial vems resistor, but accuracy would be bad.
Or you can buy this sensor (1E)
http://shop.vems.hu/catalog/product_info.php?cPath=1_12&products_id=54&osCsid=a7e20411f9aff684f671964c4a438cfd

[z0tya]

okay, thanks

i will use some better sensor than the o.e.

[[email protected]]

Those early Ford ones seemed to be similar to the sensors that are used for the dashboard temp gauge.
The later Fords seemed to use thermocouples!

Get a nice Bosch style one.